C-Band Pre-Amplifier EDFA (HA4300)

Product Description

AITC HA4300
C-Band Pre-amplifier EDFA.

Product features
1. Wide operating bandwidth (1528~1565nm).
2. Telecommunication-grade security and reliability and network management.
3.1+1 powers supply back, up hot-plug function available
4. Dual power supplies, redundant & hot swappable.
5. SCH: Single channel or 1~8 continuous ribbon channels (ITU wavelength).
6. F10: Gain flatness ≤ ± 0.5dB.
7. Low noise, high gain.
8. APC, AGC, ACC controlled selection.
9. Powerful RS232 supervisory instruction.
10. Optional multi-exterior structure.
11. Three exterior option: 1U (19" stander), 3D (12.4", 3U, Desk-type), OD (out-door) and modulator.
12.1U and 3D exterior, offering status appearance and diagnosing fault with LCD, standard RS232 communication interface, SNMP network management function.
13. OD out-door rainproof type, it is no need for generator room so that it is very convenient for the project design and operation cost.
14. Application of 3D models to adapt to laboratory.
15. Excellent P/P ratio.

Main application
1. C-Band single channel pre amplification.
2. C-Band DWDM line amplification
3. WDM fiber CATV system line amplification
4. Laboratory application

Technical index
	Performance				Index			Supplement
	Performance				Min	Typ	Max	Supplement
	Optic feature	Operation Wavelength range		(nm)	1528		1565	C-Band
		Input power		(dBm)	-30		-5
		Signal gain (Pin=-30dBm)		(dB)	20			HA4320
					25			HA4325
					30			HA4330
					35			HA4335
					40			HA4340
		Output power (Pin=-30dBm)		(dBm)		-10		HA4320
						-5		HA4325
						0		HA4330
						5		HA4335
						10		HA4340
		Noise figure	Pin=-30dBm	(dB)		4		HA4320
						4		HA4325
						4		HA4330
						3.5		HA4335
						3.5		HA4340
			Pin=-10dBm	(dB)		4		HA4320
						4.4		HA4325
						4.3		HA4330
						4		HA4335
						4		HA4340
		Gain flatness (peak-to-peak, Nominal gain)		(dB)	Single channel			SCH
		Gain flatness (peak-to-peak, Nominal gain)		(dB)	-0.5	± 0.4	0.5	F10
		Polarization dependence loss		(dB)			0.3
		Polarization dependence gain		(dB)			0.5
		Polarization mode dispersion		(ps)			0.3
		Input/output isolation		(dB)	30
		Pump power leakage		(dBm)			-30
		Echo loss		(dB)	40			UPC
		Echo loss		(dB)	55			APC
	General feature	SNMP network management interface			RJ45
		Communication interface			RS232
		Power supply		(V)	90		265	220VAC
		Power supply		(V)	30		72	-48VDC
		Power Consume		(W)			25
		Work temp.		(º C)	-5		65
		Storage temp.		(º C)	-40		80
		Operating relative humidity		(%)	5		95
		Size (W)× (D)× (H)		(" )	19× 14.5× 1.75			1RU (19" )
				(" )	12.4× 15.4× 5.25			3D (12.4" , desk-type)
				(mm)	150× 125× 22			Modulator
CHassis length
Hot-plug chassis, dimension, optical port on front panel Hot-plug chassis, dimension, optical port on back panel
Test data
HA4320 of Test data HA4325 of Test data HA4330 of Test data HA4335 of Test data HA4340 of Test data
Product series
	Model	Signal gain (Pin=-30dBm)	Output power (Pin=-30dBm)	Noise figure		Flatness
	Model	Signal gain (Pin=-30dBm)	Output power (Pin=-30dBm)	Pin=-10dBm	Pin=-30dBm	Flatness
	HA4320/SCH	20dB	-10dBm	4.7	4.5	Single channel
	HA4325/SCH	25dB	-5dBm	4.5	4.3
	HA4330/SCH	30dB	0dBm	4.3	4
	HA4335/SCH	35dB	+5dBm	4	3.5
	HA4340/SCH	40dB	+10dBm	4	3.5
	HA4320/F10	20dB	-10dBm	4.5	4.3	± 0.5dB
	HA4325/F10	25dB	-5dBm	4.3	4.1
	HA4330/F10	30dB	0dBm	4.1	3.9
	HA4335/F10	35dB	+5dBm	4	3.5
	HA4340/F10	40dB	+10dBm	4	3.5